Short summary
An integrated amplifier inheriting the RA180’s technologies for natural sound. A Class AD amplifier with GaN FETs delivers analogue-like quality, with two mono modules each supporting 250W, plus an EQ with ±15dB bass and treble.
Key info
- Integrated amplifier w/ two separate mono modules
- Power output: 250 watts per ch/ at 8Ω
- 250 watts per ch/ at 4Ω, for 500 watts total
- Class AD design using GaN FETs
- Silicon carbide power supply
- Technologies inherited from the RA180
- Moving magnet phono input at 47kΩ
- Bass and treble adjustment of +/-15dB
- Subwoofer output w/ illuminated VU meters
- Aluminium chassis w/ vintage-inspired styling
Specifications
| Weight | 9.5kg |
| Dimensions (HxWxD) | 103 x 430 x 355 |
| Enclosure material | Solid Aluminum, Rust-proof Steel |
| Power output | 500W (SMPS) (* Maximum Output : 600W) |
| THD | 0.007% (@125W) (* 250W × 2ch) |
| Frequency response | 20Hz ~ 20kHz +0. OdB (* 1W x 2ch. 8Ω Speaker Output ); 10Hz ~ 66kHz +0, -1dB (* 1W × 2ch, 8Ω Speaker Output ); 10Hz ~85kHz +0, -3dB (* 1W × 2ch, 8Ω Speaker Output) |
| S/N Ratio | 109dB / 109dB / 85dB (* 250W × 2ch) |
| Input sensitivity | Balance Input 600mV (* 250W × 2ch); Unbalance (Line 1,2,3) Input 600mV (*250W × 2ch); Phono (MM) Input 5mV (* 250W × 2ch) |
| Input impedance | 47kΩ |
| Output Impedance | 30mΩ (* 250W × 2ch) |
| Phono | Turnover 500Hz (+13dB@100Hz) (* RIAA); Roll-off 2.1kHz (-13.7dB@10kHz) (* RIAA) |
| Input voltage | AC100-230V, 50/60Hz (* Standby Mode Power Consumption < 0.5W) |
Description
Compare The Range
HiFi Rose’s integrated amplifiers, side by side. Here is the RA280 alongside the streaming RS520 and the flagship RA180. The table shows what each model adds: streaming and DAC, phono provision, inputs and power.
|
RS520
|
RA280
This model
|
RA180
|
|
|---|---|---|---|
| Price | £2,599 | £2,999 | £5,499 |
| Power Output | – | 500W (SMPS) (* Maximum Output : 600W) | 8 Ohm : 200W x 4ch (800W) |
| S/N Ratio | 105dB (@ 250W Speaker Output) | 109dB / 109dB / 85dB (* 250W × 2ch) | BTL 107dB | Balanced, Unbalanced: 105dB | Phono MM/MC: 80dB (MM), 60dB (MC) |
| Analogue Inputs | – | – | – |
| Digital Inputs | – | – | – |
| Dimensions (HxWxD) | 127 x 346 x 328 mm | 103 x 430 x 355 | 110 x 430 x 350 mm |
| Weight | 8.1kg | 9.5kg | 16.7 kg |
The long read.
The RA280 is HiFi Rose’s analogue integrated amplifier. It takes the gallium nitride amplifier technology developed for the flagship RA180 and sells it for roughly half the price. It has no streamer and no DAC. What it does have is a moving-magnet phono stage, a balanced input, tone controls and 250 watts per channel from two separate mono amplifier modules. It suits a system where the source choices are yours: a streamer of your choosing, a turntable straight into its phono input, or both. The illuminated meters and grooved aluminium top give it a deliberately vintage look, but the engineering inside is current.
Brief product overview
Each channel has its own amplifier module built on GaN FETs in what HiFi Rose calls Class AD. GaN switches far faster than the silicon used in conventional class D, and HiFi Rose quotes a tenfold reduction in dead time, the brief gap between switching transitions where distortion arises. Output is rated at 250 watts per channel into both 8 and 4 ohms. The damping factor is above 250 and the output impedance is 30 milliohms, so the amplifier keeps firm control of a woofer. A two-stage output filter removes switching noise while holding the response to −1dB at 66kHz. The power supply uses silicon carbide FETs with active power factor correction, which runs cooler and stays stable under sudden load. Inputs are one balanced XLR, three RCA line inputs and a moving-magnet phono input at 47k ohms with a ground terminal. Outputs are the speaker terminals, a mono subwoofer output and 12V trigger connections. Bass and treble controls give ±15dB through an active circuit, and the default setting is flat. It measures 103 × 430 × 355mm, weighs 9.5kg, and comes in black or silver.
How it sounds
The RA280 sounds clean, fast and composed. Its grip on bass is the benefit of the low output impedance and the ample power, and it keeps a sense of flow that switching amplifiers do not always manage. It plays loud with ease, and the power is flat into 4 ohms as well as 8, so a demanding speaker does not unsettle it. Its tonal balance is neutral rather than warm, which lets the speakers and source set the character; the tone controls are there if a room needs help. The phono stage is a genuine convenience rather than a specialist’s stage. It is moving-magnet only with fixed loading, and it is quieter measured through the line inputs than the phono input. It suits a good MM cartridge well, but a serious moving-coil setup will want its own stage.
What we’d partner it with
The RA280 needs a digital source, and the HiFi Rose RS250A is the natural one. It is a network streamer and DAC built around ESS’s ES9028PRO chip with a femtosecond clock and HiFi Rose’s discrete output stage, playing to 32-bit/768kHz and DSD512. It runs the same Rose OS on an 8.8-inch touchscreen, with Roon Ready, AirPlay, Spotify Connect, Tidal and Qobuz. Its fixed-level RCA output goes into one of the RA280’s line inputs. Stock permitting, the Eversolo DMP-A6 Gen 2 offers a balanced XLR output that uses the RA280’s XLR input. The Bluesound Node Icon does the same with dual DACs and Dirac Live room correction readiness.
For speakers, the Mission 770 is a well-judged match in both look and load. It is a modern rebuild of the 1970s original, with a 200mm mineral-loaded polypropylene woofer, a 28mm microfibre dome tweeter and a large, damped 38.5-litre cabinet. It has 88dB sensitivity and a gentle 8-ohm load that never dips below 6 ohms. Bass reaches 42Hz at −3dB, and the RA280 can drive it to levels the room will object to first. Stock permitting, the Wharfedale Linton is a three-way heritage alternative at 90dB, and the Revival Audio Atalante 3 is a more modern-sounding standmount at 87dB.
For vinyl, the Clearaudio Compass partners the built-in phono stage directly. It is a belt-drive deck with a 20mm acrylic platter, a T1 tonearm and a factory-fitted N1 moving-magnet cartridge, and it is made in Erlangen. Stock permitting, the Rega Planar 3 with the Nd5 cartridge and the Technics SL-1500C with an Ortofon 2M Red are both MM-equipped alternatives. Any low-output moving-coil cartridge would need an external stage, such as the Pro-Ject Phono Box S3 B, into a line input. On cabling, use a well-made speaker cable of appropriate gauge; AudioQuest and Chord are the cable brands we stock.
Who shouldn’t buy it
If you want streaming built in and do not play records, the RS520 puts a streamer, DAC and 250 watts in one box, though without a phono stage. If you play vinyl through a moving-coil cartridge, the RA280’s MM-only stage will need help, and an amplifier with MM and MC built in, such as the Yamaha A-S1200, may be tidier. If you want room correction and both phono types in a streaming integrated, the Arcam SA45 covers all of it. And if you are building a reference system around the same GaN amplifier technology, the RA180 is the flagship above it.
One amplifier, two sources. Here’s how we’d build around it.
Digital
A 250-watt GaN integrated fed by a touchscreen network streamer and DAC, driving an 88dB, 8-ohm two-way standmount.
Analogue
A belt-drive turntable with an MM cartridge straight into the RA280’s built-in phono stage.
Useful Notes
Give the RA280 a solid shelf with some space around it. It runs cool but should not be stacked beneath other equipment. Connect the speakers to one pair of terminals. The second pair allows bi-wiring. Connect the RS250A’s RCA output to Line 1, 2 or 3, and set the RS250A to fixed output so the RA280’s volume control does the work. For a source with a balanced output, use the XLR input. For vinyl, connect the Compass to the phono input, attach its earth lead to the ground terminal, and select phono with the front-panel switch. The N1’s 3.3mV output is on the modest side for the stage’s 5mV rated sensitivity, so expect to use a little more of the volume control than on the line inputs. Leave the tone controls flat to begin with and adjust only to suit the room. The subwoofer output feeds a powered sub if you want one, and the trigger connections let the RA280 switch on with other components. The Mission 770 is a large standmount that works best on rigid stands with its tweeter near ear level; Mission’s dedicated 770 stands are the neat option.

D (verified owner) –
It\’s still running in, but I am so glad I went for the beautifully built RA280, wonderful clarity, clean effortless presentation with clearly delineated elements. Surprisingly capable at conveying those nuances and inflections on vocals and can go from detailed whispers to thunder with ease. The amps already given me many goose bump moments!
Leave a review