Topping PA5 Power Amplifier
The Topping PA3s Digital Amplifier is ready for any 4 – 8 ohm loudspeakers with two TRS fully balanced inputs in a small package the PA5 is ideal for desktop systems.
|Dimensions (HxWxD)||16.6 x 12.9 x 4.1 cm|
|Frequency response||20Hz-40kHz (±0.3 dB)|
|Dynamic range||124dB @A-wt|
The newly developed Class D amplification circuit uses multiple novel optimization techniques to fully push the performance and output power to the maximum. The new circuit provides crisp, clean and deep sound with completely inaudible noise floor. The fully balanced structure makes PA5 no more hum, no more noise, no more ground loop.
Distortion is as outstanding as DAC
<0.0005% @4Ω 5W; <0.0004% @8Ω 5W. The distortion of PA5 is as low as that of AC. Even in the vicinity of the commonly used 20W, PA5 can achieve 0.0003% THD+N under 8Ω load.
High output power
PA5 could output 140W x 2 at 4ohm load, 10% THD+N. In higher standard of THD+N of 1%, output power will be 125W x 2 at 4ohm load. The high output power and low distortion on load are sufficient for most speakers and applications.
Zero pop noise or thumping during turn-on or turn-off. Over-voltage, under-voltage, short-circuit, over-current, over-heat protection are complete.
E50 is the best DAC for PA5
PA5 and E50 have fully matched design language and styles, and signals can transmit in balanced by TRS.
PA5+E50+L50 this is a fully functional combination
When you need a more comprehensive system, we recommend a combination of PA5 power amplifier, E50 DAC, and L50 headphone amplifier. In this way, there are corresponding equipment from the digital audio source to driving speakers and headphones.
D10 Balanced could be best USB DAC for PA5
D10 Balanced can provide high-fidelity USB decoding and TRS balanced output. When used with PA5, it is equivalent to adding a high-performance USB input to PA5. This combination is simple and efficient.