Short summary
Bookshelf speakers assembled in France, with a retro style and walnut veneer. They use a 28mm soft-dome tweeter with ARID and a 7-inch Basalt Sandwich woofer, with a Phase-Coherent crossover and Van Den Hul cables.
Key info
- Bookshelf speakers designed and assembled in France
- 28mm soft-dome tweeter w/ ARID inner dome
- RASC coating w/ a large ferrite magnet system
- 7 inch Basalt Sandwich Construction woofer
- Phase-Coherent-Fast-Response crossover topology
- Van den Hul internal cables
- Walnut veneer w/ belt and knot detailing
- Crafted burned logos
Specifications
| Weight | 11 kg |
| Dimensions (HxWxD) | 390 x 240 x 270 mm |
| Sensitivity | 87dB/2.83V/1metre |
| Impedance | 4.4 ohms at 175Hz |
| Crossover frequency | 2.8kHz |
| Frequency Response | 44Hz – 22kHz (-3dB) |
Description
Compare The Range
Revival Audio’s Atalante standmounts side by side: the two-way Atalante 3 and the larger three-way Atalante 5 above it, showing what your money buys at each step.
|
Atalante 3
This model
|
Atalante 4
|
Atalante 5
|
|
|---|---|---|---|
| Price | £2,490 | £4,090 | £5,190 |
| Frequency Responce | 44Hz – 22kHz (-3dB) | 38Hz – 22kHz (-3dB) | 28Hz – 22kHz (-3dB) |
| Sensitivity | 87dB/2.83V/1metre | 89dB/2.83V/ 1 metre (2.83V/1m) | 89dB/2.83V/ 1 metre |
| Recommended Amplifier Power | – | Power handling: 200 watts. Starting from 30-50 watts | – |
| Impedance | 4.4 ohms at 175Hz | Nominal Impedance 4 ohms. Minimum Impedance 3.2 ohms at 120Hz | 3.2 ohms at 110Hz |
| Dimensions (HxWxD) | 390 x 240 x 270 mm | 1200 x 345 x 395 mm | 710 x 420 x 355 mm |
| Weight | 11 kg | 38 kg | 33 kg |
The long read.
The Atalante 3 is the speaker that launched Revival Audio, and it remains the most compact model in the Atalante range. It is a two-way standmount with a wide, sculpted baffle and real wood veneer in a deliberately retro cabinet by the Paris studio A+A Cooren.
Its drive units are designed at Revival’s French facility, and final assembly and testing are carried out in France. It shares its core technology with the more affordable Sprint range: the ARID tweeter and the basalt-sandwich woofer. What the extra money buys is a more elaborate tweeter chamber, a more considered cabinet and a noticeably more finished object. It is not a speaker for a large room or for high volumes. It is a precise, monitor-like two-way that rewards careful partnering.
Brief product overview
The Atalante 3 is a two-way reflex standmount with a rear port, supplied with foam plugs for placement near a wall. It pairs a 28mm soft-dome tweeter with a 180mm woofer, crossing over at 2.8kHz.
The tweeter combines Revival’s patented ARID system, an anti-reflection inner dome that absorbs the energy the dome radiates backwards, with Back Chamber Damping. This is a rigid rear cover with asymmetric rims, shaped by simulation to soak up resonance, which lowers the tweeter’s own resonant frequency well below its working range.
The woofer uses Revival’s BSC basalt sandwich construction: a basalt-fibre cone, stiffer than glass fibre, bonded to a felt backing with a damping polymer. The result is a cone that is light, rigid and well controlled.
The tweeter is offset on the baffle, so the speakers come as a mirror-imaged left and right pair. Quoted response is 44Hz to 22kHz at ±3dB, and sensitivity is 87dB. Nominal impedance is 6 ohms, with a minimum of 4.4 ohms at 175Hz, which is an easy load for a capable amplifier. Revival recommends 30 to 150 watts and rooms of 15 to 35 square metres. Each speaker measures 390 x 240 x 270mm (HxWxD) and weighs 11kg.
How it sounds
The Atalante 3 is a speaker for listening in detail. It is precise and transparent through the midrange, with the quick, well-damped bass that the basalt cone is designed for and a treble that stays clean rather than bright. The offset tweeters and wide baffle produce a stable, well-defined stereo image. Swapping the pair between tweeters-in and tweeters-out gives some control over its width.
Bass is solid and articulate down to the mid-40s, more than the cabinet size suggests. It is tuneful rather than overblown, and the foam plugs tame it further in a room where the speakers must sit close to a wall.
The honest limits are those of a two-way standmount. It will not produce the weight of a floorstander, and it is not built to play very loud in a large room. Its 87dB sensitivity and 6-ohm load call for a proper amplifier. Given one with genuine current, it sounds composed and dynamic. Given a weak one, it sounds accurate but polite.
What we’d partner it with
The Yamaha A-S1200 is a natural match: a purely analogue Class AB integrated amplifier with 90 watts per channel into 8 ohms and 150 into 4. It is built around a 625VA toroidal transformer and Yamaha’s Floating and Balanced output stage, which uses the same type of MOSFET output device for both halves of the signal. Yamaha’s aim is lower noise and a more symmetrical output.
A switchable phono stage accepts both moving-magnet and low-output moving-coil cartridges. Alongside it are four line inputs, a Main In for use as a power amplifier, a pre-out, a headphone output and analogue level meters. There is no DAC and no streaming. Stock permitting, the alternatives are the Rega Elicit Mk5, a British integrated with a moving-magnet phono stage and a DAC, and the Primare I25 Prisma, with network streaming built in.
For streaming, the Bluesound Node Icon provides everything the A-S1200 leaves out. It is a BluOS network streamer with dual ESS ES9039Q2M DACs and Bluesound’s QRONO d2a filtering, and it adds an HDMI eARC input for a television, a THX AAA headphone amplifier and Dirac Live room correction readiness. Its RCA output feeds a line input on the Yamaha. Stock permitting, the alternatives are the Eversolo DMP-A6 Gen 2, with a larger touchscreen and room correction, and the HiFi Rose RS151.
For vinyl, the Clearaudio Compass is a precise, well-engineered partner. It is a belt-drive deck made in Erlangen, with a decoupled DC motor, a 20mm acrylic platter on a machined aluminium sub-platter, electronic speed selection and Clearaudio’s T1 tonearm, fitted with the N1 moving-magnet cartridge. The deck has no phono stage of its own, and the Yamaha’s MM input does the job. Stock permitting, the Rega Planar 6 is the alternative for a moving-magnet setup. The Pro-Ject X8 with its Quintet Blue moving-coil cartridge would make use of the Yamaha’s MC setting.
On cabling, use a well-made speaker cable of appropriate gauge for the run; AudioQuest and Chord are the cable brands we stock.
Who shouldn’t buy it
If you want the same drive-unit technology for less, the Sprint 3 uses a similar ARID tweeter and basalt woofer in a simpler cabinet. If your room is larger, or you want more bass extension and headroom from a standmount, the three-way Atalante 5 is the step up. And if your room is over 35 square metres or you listen loud, a floorstander such as the Atalante 4 will serve better. The Atalante 3 needs an amplifier with some current behind it, so it is not a partner for very low-powered electronics.
One loudspeaker, two complete systems. Here’s how we’d build around it.
The Streaming System
A 90-watt Class AB integrated fed by a dual-DAC network streamer, driving an 87dB, 6-ohm two-way standmount.
The Analogue Extension
A belt-drive turntable with Clearaudio’s N1 moving-magnet cartridge into the amplifier’s built-in phono stage.
Useful Notes
The Atalante 3 wants a rigid, level surface with the tweeter near ear level. Revival’s dedicated Atalante 3 stands are an option for this. The speakers are a mirror-imaged pair, so check which cabinet is left and which is right. Start with the tweeters on the inside edges for the most focused image, then try them outside for a wider stage.
Because the port fires from the rear, leave some space behind the cabinets. Moving them nearer the wall fills out the bass, and fitting the supplied foam plugs restores control where the speakers must sit close to it. Angle the speakers slightly towards the listening seat and fine-tune toe-in in small steps.
Connect the speakers to the A-S1200’s A terminals, observing polarity. Set the Node Icon’s output to fixed level in the BluOS app so the Yamaha controls volume. Set the A-S1200’s phono selector to MM for the Compass’s N1 cartridge and connect the deck’s earth lead to the amplifier’s ground terminal.

There are no reviews yet.
Leave a review