A NEW MODERN PROFILE AND A STRONGER STRUCTURE
Exclusively for Audiovector R 11, R 8 & R 6, the cabinets are assembled by thick non-resonant vacuum pressured shells. Made from high density hardwood (HDF) for the best possible strength and low resonance. The teardrop shape in combination with a laminated, dense, strong and heavy, rear baffle further reduces unwanted cabinet resonance and avoids standing waves. When assembled, cabinets are heavily braced internally and carefully damped with strategically positioned Nano Pore damping plates.
The newly designed baffles and plinth are made from carefully hand finished HDF, complementing the stiffness of the cabinets. The baffles are laminated for improved strength.
A benefit of this design is that we get to preserve maximum dynamics and performance. Cabinets are available in high gloss or matt finishes of exotic real wood veneers and a wide variety of luxurious custom colors.
All new R 6 models comes with a newly designed, solid plinth for improved air flow. M8 Spikes are mounted in a flexible steel construction to decouple the speakers from the floor.
NEW COMPOUND BASS SYSTEM
All R 6 models have been generously upgraded with a new bass system. All models use an isobaric compound bass system in order to go deeper, be more precise, play dynamic and aperiodic in their response. We use a hand built 6,5” internal woofer and 8” external woofer.
The Audiovector Isobaric Compound Bass system (ICB): The masses of the two bass drivers involved are coupled together by the trapped air in their common internal enclosure. This is possible without losing precision and the result is a precise, deep and controlled bass. In the R 6 series, the system ´breathes´ through a perfectly tuned bass reflex on the front of the speaker.
THE NEW AUDIOVECTOR CARBON DRIVE UNITS, PRECISION AND HIGH DEFINITION
Rather than having to buy of the shelf drive units from even the finest and most respected manufacturers, we engineer our drivers in house and ask the best suppliers to build them for us. This way we make sure that we can co-engineer our drive units with our crossovers to form a perfect entity. Drivers are built by hand in Denmark in collaboration with Scan-Speak and their skilled craftsmen.
The combination of Titanium Coil Technology, large powerful ceramic ferrite magnets and rigid turbulence suppressing magnesium alloy, 3-point suspended baskets and membranes made from cross woven Aramid Composite Fibers, allows us to reach a rich, clear and vibrant sound.
With a result of optimal heat dissipation, a highly rigid titanium bobbin and an accurate response of the whole membrane assembly, the linear performance of the new driver now contributes to a clear bass and faithful uncolored midrange performances.
EVOTECH SIGNATURE SOFT DOME TREBLE DRIVER
Our dome tweeters have always been well ahead of its time. Featuring a silk dome, which is supported on its rear side by a pressure regulating accelerator. A no Compression driver due to its open back which is carefully adjusted to work in our unique Soundstage Enhancement Concept (SEC).
A broad authentic soundstage, which opens the whole experience of airiness and depth. Producing a delicate, fast and very detailed reproduction up to 26 kHz with a low level of distortion.
AVANTGARDE & ARRETE AIR MOTION TRANSFORMER TREBLE DRIVERS
Probably the fastest treble driver construction. Based on the original revolutionary technology, invented in the 1970´s by Dr. Oscar Heil. Our tweeters have no mass to accelerate or decelerate. Reaches up to more than 52.000 Hz with perfect dispersion in both the horizontal and vertical plane.
The AMT features ultra-strong Neodymium magnets, lightweight precision coated mylar membranes and are mounted and decoupled from the cabinet in 3 points, a proprietary Audiovector concept called No Energy Storage (NES).
The tweeters are open to the front and to the rear, being able to move freely due to the Soundstage Enhancement Concept (SEC).
Furthermore, in the top of the line Arreté models, the hand built Audiovector Arreté AMT treble driver uses an integrated acoustic lens which allows for an even sweeter, more detailed treble response and exemplary integration with the other drivers. The R 8 Arreté has been a great inspiration here.
MINIMAL BAFFLE AREA
In order to take full advantage of the Audiovector treble drivers and the newly developed Carbon drivers, the front baffle is as narrow as possible. The result is a smooth, broad, precise sound diffusion, which keeps unwanted diffraction distortion to an absolute minimum.
3D SOUNDSTAGE + 3” REAR FIRING MIDRANGE DRIVER
To further improve realism and 3D performance, the new R 6 Arreté now uses a rear firing 3” midrange driver with its own dedicated crossover. The technology using a rear firing driver, is inspired by our reference R 11 and R 8 Arreté. The construction also adds a perfectly dosed level of midrange.
AUDIOVECTOR CROSSOVER TECHNOLOGY
The crossover is the heart of the loudspeaker – strong and precise with low distortion
The new R 6 crossovers provides an ultraclean signal path in order to retain the most detailed musical reproduction.
By using only one high precision, high quality and cryogenically treated component in series with each driver, we minimize resistance loss. And by adding our Dynamic Feed Forward Technology (DFF) the resistance related loss in coils is reduced up to 50%, minimize build-up heat which results in improved transient performance.