Short summary
Dedicated floorstanding speakers for multi-channel systems and the largest in the Emit range. They use high-quality 14cm MSP woofers and a Cerotar tweeter with Hexis technology for smooth, fatigue-free treble, in three laminate finishes.
Key info
- Floorstanding speakers for stereo or multi-channel use
- The largest model in the Emit range
- MSP woofer cones for detailed, controlled bass
- Cerotar tweeter w/ Hexis inner dome
- Smooth, fatigue-free treble
- Consistent w/ other Emit speakers
- Black, White or Walnut laminate finishes
Specifications
| Weight | 26kg |
| Dimensions (HxWxD) | 1140 x 205 x 312 mm |
| Active / Passive | Passive |
| Recommended Amplifier Power | 50 – 250 W |
| Sensitivity | 86dB @ 2.83V/1m |
| Impedance | 4 Ω |
| Crossover frequency | 540/4400 HZ |
| Crossover type | 3-way |
| Frequency Response | 33 - 25.000 Hz |
| Design type | Bass reflex rear double flared port |
| LF | 2x 18 cm MSP |
| MF | 15 cm MSP |
| HF | 28mm Cerotar soft dome with Hexis |
| What's in the box | Grille |
Description
Compare The Range
Dynaudio’s Emit range, side by side. Here is the range-topping Emit 50 alongside the Emit 30 floorstander and the Emit 20 standmount, showing what your money buys at each step.
|
Emit 20
|
Emit 30
|
Emit 50
This model
|
|
|---|---|---|---|
| Price | £825 | £1,300 | £1,750 |
| Frequency Responce | 53Hz–25kHz | 44Hz – 25kHz | 33 – 25.000 Hz |
| Sensitivity | 86dB @ 2.83V/1m | 88dB @ 2.83V/1m | 86dB @ 2.83V/1m |
| Recommended Amplifier Power | 40 – 160W | 50 – 180W | 50 – 250 W |
| Impedance | 6 Ω | 4 Ω | 4 Ω |
| Dimensions (HxWxD) | 370 x 205 x 312 mm | 900 x 170 x 170 mm | 1140 x 205 x 312 mm |
| Weight | 10.3 kg | 15.5kg | 26kg |
The long read.
The Emit 50 is the flagship of Dynaudio’s entry-level range, and the point at which it stops being a 2.5-way with doubled-up drivers and becomes a proper three-way with a dedicated midrange unit. That midrange is specific to this model, using an aluminium voice coil and filter-down technology from the considerably dearer Contour series, and it changes the character of the speaker: the drivers either side of it are freed to do one job each. Twin 18cm woofers take the bass to 33Hz, which is genuinely full-range, and the crossover uses three different filter slopes rather than one applied across the board.
Brief product overview
A three-way floorstanding loudspeaker with a 28mm Cerotar soft-dome tweeter fitted with Hexis, a 15cm MSP midrange derived from the Evoke and Contour ranges, and two 18cm MSP woofers with copper voice coils and dual-stacked magnet systems. The Hexis is a static dimpled inner dome placed close behind the fabric diaphragm to stop rear reflections interfering with the front wave, keeping the treble smooth and clean. The crossover is a hybrid design using a first-order slope for the tweeter, second-order for the midrange and fourth-order for the woofers, handing over at 540Hz and 4,400Hz; Dynaudio’s engineers chose three different topologies rather than one compromise circuit. The mid and bass drivers use one-piece cone and dust-cap construction for a better connection to the voice coil. Two rear dual-flared bass reflex ports handle the low end, and the 18mm MDF cabinet is damped with polyester fibre. Sensitivity is 86dB with a 4-ohm nominal impedance and IEC power handling of 240 watts. Frequency response runs from 33Hz to 25kHz within 3dB, reaching 28Hz at minus 6dB. It measures 205 x 1,140 x 311.5mm and weighs 25.96kg each, in black, white or walnut laminate.
How it sounds
The dedicated midrange is what you hear first: voices and instruments through the middle of the range have a clarity and separation that no 2.5-way can quite match, because the driver reproducing them is doing nothing else. Beneath that, twin 18cm woofers give the Emit 50 genuine authority and extension, and the close spacing between tweeter and midrange reflects the care taken over driver integration, which shows in how coherently the speaker images. It keeps the Emit family’s honesty, transparent enough to expose a thin recording without exaggerating its faults. At 86dB into a 4-ohm load it is the least sensitive speaker in the range and it is a large floorstander, so amplification matters: it wants current and headroom rather than a modest amplifier working hard.
What we’d partner it with
The Arcam A25+ is a well-judged match, and its Class G topology is the reason. Class G gives the delicacy of Class A at low levels while keeping the headroom for large dynamic swings, which suits a speaker that is both revealing and demanding. It delivers 100 watts into 8 ohms and 165 into 4, which is what the Emit 50 actually presents, and distortion is held to 0.002%. A dual-DAC architecture with a dedicated ESS chip for the S/PDIF inputs handles digital, with two coaxial and one optical input to 192kHz, USB-C to 384kHz, and HDMI eARC for television sound. Bluetooth 5.4 with Snapdragon Sound and aptX Lossless covers wireless playback, and Auracast lets multiple headphones share the same stream.
For network streaming, note the A25+ has Bluetooth but no Wi-Fi or Ethernet, so Tidal, Qobuz and Spotify Connect need a source. Arcam builds the matching ST25 streamer for exactly this, which keeps the system within one brand and one design language.
For vinyl, the A25+ has a carefully tuned moving-magnet phono stage at the standard 47 kohms and 100pF, accurate to within 1dB of the RIAA curve, so a turntable connects directly. The Pro-Ject Debut Reference 10 is the flagship of the Debut line: a 10-inch hybrid carbon and aluminium tonearm, a substantial acrylic platter, electronic speed switching and adjustable VTA and azimuth, supplied with the Pick it PRO Balanced moving-magnet cartridge factory-fitted. Note the deck also offers a balanced mini-XLR output for use with a balanced phono stage, which the A25+ does not have, so it would run single-ended here.
On cabling, use a well-made speaker cable of appropriate gauge for the run; AudioQuest and Chord are the cable brands we stock.
Who shouldn’t buy it
If your room is medium-sized, the Emit 30 covers similar ground in a slimmer cabinet without the risk of overloading the space with bass. If you want a standmount, the Emit 20 shares the same tweeter and MSP driver technology. And if your amplifier is modest, this is the wrong speaker for it; at 86dB into 4 ohms with a 240-watt power handling rating, the Emit 50 is built to be driven properly.
One loudspeaker, two complete systems. Here’s how we’d build around it.
The Streaming System
An 80-watt British integrated with a hi-res DAC, HDMI eARC for the television and aptX Lossless Bluetooth.
The Analogue Extension
The same system with a turntable added, the A25 has a built-in phono stage, so nothing sits between the two.
Useful Notes
The Emit 50 weighs nearly 26kg each, so positioning is a two-person job; fit the supplied feet before moving them into place and level each cabinet properly. Both ports fire from the rear, so leave space behind the speakers, and expect to spend time on distance from the wall, as a speaker reaching to 28Hz will interact strongly with the room. Connect a television to the A25+’s HDMI eARC input for automatic switching. For vinyl, connect the Debut Reference 10 to the phono input using its RCA output and connect the earth lead; the supplied Pick it PRO Balanced is a moving-magnet cartridge, so no external stage is needed. The pre-out allows a subwoofer or power amplifier later.

There are no reviews yet.
Leave a review