Short summary
● 30mm Beryllium DLC dome tweeter for exceptional transparency
● Dedicated 180mm natural-fibre midrange with neodymium motor system
● Twin 180mm woofers housed in independent Stealth Reflex chambers
● Dual 220mm nanocarbon/Nomex long-throw infra-woofers
● Redesigned crossover with Paracross Topology and premium components
● Extended 25Hz–35kHz response with 92dB sensitivity
● Aluminium Dampshelves and Zero Vibration Transmission isolation
● Separate Mid-Hi and Low terminals support bi-wiring and bi-amplification
Specifications
| Weight | 84 kg each |
| Dimensions (HxWxD) | 1449 × 398 × 621 mm each |
| Shipping Weight | 123.5 kg each |
| Shipping dimensions (HxWxD) | 1770 × 600 × 800 mm |
| Enclosure type | 3.5-Way Full Para-Aperiodic Vented Floorstanding Speaker |
| Enclosure material | High-Gloss Wood, Black Leather and Aluminium |
| Active / Passive | Passive |
| Driver Size | 2 × 220 mm Subwoofer, 2 × 180 mm Woofer, 1 × 180 mm Midrange, 1 × 30 mm Tweeter |
| Frequency range | 25 Hz – 35 kHz |
| Recommended Amplifier Power | 100–800 W, undistorted signal |
| Sensitivity | 92 dB SPL (2.83 V / 1 m) |
| Impedance | 4 Ω Nominal |
| Crossover frequency | 80 Hz / 250 Hz / 2500 Hz |
| Crossover type | 3.5-Way |
| Frequency Response | 25 Hz – 35 kHz |
| Design type | 3.5-Way |
| LF | 2 × 220 mm Nanocarbon Fibre / Nomex Honeycomb Long-Throw Subwoofers; 2 × 180 mm W18XTR-12 Woofers |
| MF | 180 mm M18 XTR-04 Midrange with Neodymium Magnet System |
| HF | 30 mm Diamond-Like Carbon Beryllium Dome Tweeter |
Description
Compare The Range
Sonus faber’s high-end floorstanders, side by side. Here is the limited-edition Il Cremonese ex3me alongside the Stradivari G2 and the Amati Supreme, showing how each one weighs scale, technology and craftsmanship.
|
Stradivari G2
|
Reference il Cremonese Ex3me
This model
|
Amati Supreme
|
|
|---|---|---|---|
| Price | £54,000.00 | £60,000.00 | £75,000.00 |
| Frequency Responce | 25 Hz – 35000 Hz | 25 Hz – 35 kHz | 28Hz–40kHz |
| Sensitivity | 92 dB SPL (2.83V/1 m) | 92 dB SPL (2.83 V / 1 m) | 91dB SPL (2.83V/1m) |
| Recommended Amplifier Power | 100W – 600W | 100–800 W, undistorted signal | 50–600W |
| Impedance | 4 Ω | 4 Ω Nominal | 4Ω Nominal |
| Dimensions (HxWxD) | 1374 x 715 x 428 mm | 1449 × 398 × 621 mm each | 1176 × 411 × 512 mm |
| Weight | 63 kg / each | 84 kg each | 62 kg (per speaker) |
The long read.
The Il Cremonese ex3me is a special edition of the Il Cremonese, the Reference Collection floorstander that Sonus faber’s own R&D team used as a test bench for new technologies. The ex3me keeps the original’s five-sided cabinet, its midrange and its woofers. It adds the beryllium tweeter, crossover refinements and new infra woofers from the Ex3ma, Sonus faber’s 30th-anniversary concept speaker. It was introduced in 2020 as a limited run of 50 pairs, marking the return of the classic Red Violin finish, and Sonus faber’s stated target for it is neutrality. It is the Il Cremonese taken further at the frequency extremes, with the voice of the original left intact in between.
Brief product overview
A 3.5-way floorstander with six drivers. The tweeter is a 30mm beryllium dome with a diamond-like carbon (DLC) coating, which damps beryllium’s metallic character while keeping its stiffness. The midrange is the original’s 180mm M18 XTR-04, with a natural-fibre cone and neodymium motor. The two 180mm W18XTR-12 woofers also carry over, and the two 220mm long-throw infra woofers are new, with nanocarbon fibre and Nomex honeycomb cones. Crossover points are 80Hz, 250Hz and 2.5kHz. Bass is loaded by the Stealth Reflex system, with a rear port and a port in the base that fires at the floor. Four binding posts split the mid-high and low sections for bi-wiring, and ZVT spikes decouple the cabinet from the floor. Frequency response is quoted at 25Hz to 35kHz, sensitivity at 92dB and nominal impedance at 4 ohms, with Sonus faber recommending 100 to 800 watts. Each cabinet measures 1449 × 398 × 621mm and weighs 84kg.
How it sounds
The ex3me keeps the Il Cremonese’s natural midrange and adds the transparency and fine dynamics of the beryllium tweeter. Treble is more detailed and more open than the original’s silk dome, without hardness, and quiet detail and room ambience come through more clearly. The new infra woofers give the lowest octave more control and definition, so the bass goes as deep as before, to 25Hz, but starts and stops more cleanly. It is more neutral than the Sonus faber stereotype of warmth, which suits electronics with their own body and texture. At 92dB it is not hard to drive, but it has the scale for a large room and rewards current and headroom. The honest limits: it is 84kg a side and deep, the floor-firing port needs a solid floor and space, and as a limited edition, availability and finishes are restricted.
What we’d partner it with
For power amplification, a pair of Pass Labs XA200.8 monoblocks, one per speaker. These are pure Class A designs, each rated at 200 watts into 8 ohms and 400 watts into 4 ohms. Class A means the output devices conduct across the whole waveform, avoiding the crossover distortion of Class AB, at the cost of heat and an idle draw of around 760 watts each. 400 watts into 4 ohms sits comfortably inside the ex3me’s 100 to 800-watt window. A pair of XA160.8s (160 watts into 8 ohms, 320 into 4) is the lower-cost Pass Labs choice. A pair of McIntosh MC3500 Mk II valve monoblocks gives the system a valve character (both stock permitting).
The Pass Labs XP-22 is the preamplifier: a two-chassis, dual-mono line stage with its toroidal transformers in a separate supply chassis linked by an umbilical cable. It has two balanced XLR and three RCA inputs, balanced and single-ended outputs and a 99-step volume control. The Aurender A20 is the digital source, a music server and streamer with a dual-mono AKM AK4497 DAC, an OCXO word clock, slots for two user-installed drives, and balanced and single-ended outputs. It plays to 32-bit/768kHz and native DSD512, and it also has coaxial and optical inputs for other digital sources. The McIntosh DS200 is the alternative streaming DAC (stock permitting).
For vinyl, the Technics SL-1000R is a direct-drive turntable built around the SP-10R motor unit. Its double-coil, twin-rotor coreless motor drives a 7.9kg platter of aluminium, brass and tungsten, with wow and flutter of 0.015%, and it has a 10-inch magnesium S-shaped tonearm. Fitted with the Sumiko Palo Santos Presentation, a low-output moving-coil (0.5mV) with a boron cantilever, line-contact stylus and Brazilian rosewood body, it feeds the Pass Labs XP-27. The XP-27 is a two-chassis phono stage with gain of 56, 66 or 76dB, loading from 30 ohms to 47k ohms set from the front panel, and two inputs. The Linn Klimax LP12, ordered without internal phono, is the alternative deck, and the Pass Labs XP-17 the single-chassis phono stage (both stock permitting).
For the connections, use balanced XLR interconnects from the preamplifier to the monoblocks, and bi-wire speaker cable of appropriate gauge for the run. AudioQuest and Chord are the cable brands we stock.
Who shouldn’t buy it
If the beryllium tweeter and new infra woofers are not essential, the standard Il Cremonese has the same cabinet, midrange and woofers for less. If you want the most recent Sonus faber development at this level, the Stradivari G2 and Amati Supreme carry newer driver and crossover work. And if your room cannot accommodate an 84kg, 621mm-deep speaker with space around it, the Serafino G2 is the better-proportioned choice.
One loudspeaker, two complete systems. Here’s how we’d build around it.
An all-valve McIntosh integrated fed by a flagship streamer and DAC.
For those whose library lives in files and streaming.
The Analogue Extension
For those who buy records and want the ritual.
Useful Notes
Setup: Fit the ZVT spikes and level each cabinet on a solid floor, since one port fires at the floor through the base. Give the speakers real distance from the rear wall for the rear port, and position them patiently before toeing them in. The four binding posts split the mid-high and low sections: bi-wire them, or link them for a single run. Connect one XA200.8 to each speaker, and only connect or disconnect with the amplifiers switched off. The XA200.8s run hot in Class A, so give each its own ventilated space on the floor or a low, open shelf, and allow about an hour of warm-up before critical listening. Set the Aurender A20 to fixed output so the XP-22 controls the level. For vinyl, fit the Palo Santos to a headshell on the SL-1000R’s arm at 2.0g tracking force. Run the arm cable into one of the XP-27’s inputs, start at 66dB gain with loading between 100 ohms and 1k ohms, and connect the earth lead.

There are no reviews yet.
Leave a review