New Product

Short summary

● Reference 3.5-way floorstanding loudspeaker handcrafted in Italy
● 28mm DAD Arrow Point soft-dome tweeter
● Dedicated 180mm neodymium midrange driver
● Twin 180mm woofers with dual 220mm infra-woofers
● Rhomboidal Diamond cabinet with non-parallel internal surfaces
● Avional Damper Shelves and Zero Vibration Transmission isolation
● 92dB sensitivity with 35Hz–35kHz frequency response
● Mid-Hi and Low terminals support bi-wiring and bi-amplification

Specifications

Physical characteristics
Weight 84 kg each
Dimensions (HxWxD) 1449 × 398 × 621 mm
Shipping Weight 123.5 kg each
Shipping dimensions (HxWxD) 1770 × 600 × 800 mm each
Enclosure type 3.5-Way Full Para-Aperiodic Vented Floorstanding Speaker
Enclosure material Double-Curvature Lute-Shaped Cabinet, High-Gloss Wood, Black Leather and Aluminium
Speaker characteristics
Active / Passive Passive
Driver Size 2 × 220 mm Subwoofer, 2 × 180 mm Woofer, 1 × 180 mm Midrange, 1 × 28 mm Tweeter
Frequency range 35 Hz – 35 kHz
Recommended Amplifier Power 100–800 W, without clipping
Sensitivity 92 dB SPL (2.83 V / 1 m)
Impedance 4 Ω Nominal
Crossover frequency 80 Hz / 250 Hz / 2500 Hz
Crossover type 3.5-Way
Bi-Wireable Yes
Crossover frequency 80 Hz / 250 Hz / 2500 Hz
Frequency Response 35 Hz – 35 kHz
Drive units
Design type 3.5-Way
LF 2 × 220 mm W22XTR-16 Infra-Woofers; 2 × 180 mm W18XTR-12 Woofers
MF 180 mm M18 XTR-04 Midrange with Neodymium Magnet System
HF 28 mm H28 XTR-04 Extended-Range Soft-Dome Tweeter with DAD Arrow Point

Description

01 · Specifications

Compare The Range

Amati G5
Reference il Cremonese
This model
Stradivari G2
Price £36,000 £53,000 £54,000
Frequency Responce 28 Hz – 35,000 Hz 35 Hz – 35 kHz 25 Hz – 35000 Hz
Sensitivity 91 dB SPL (2.83V/1 m) 92 dB SPL (2.83 V / 1 m) 92 dB SPL (2.83V/1 m)
Recommended Amplifier Power 50W – 450W 100–800 W, without clipping 100W – 600W
Impedance 4 Ω 4 Ω Nominal 4 Ω
Dimensions (HxWxD) 1176 x 411 x 512 mm 1449 × 398 × 621 mm 1374 x 715 x 428 mm
Weight 61 kg / each 84 kg each 63 kg / each
02 · IN DETAIL

The long read.

The long read.

The Il Cremonese is named after the 1715 Stradivari violin of the same name, which in 1961 became the first Stradivari returned to Cremona for its civic collection. It was launched in 2015 to complete the Homage Collection. It became a working reference inside Sonus faber’s Arcugnano factory, a test bench for new technologies, and moved into the Reference Collection alongside Aida and Lilium. Its five-sided “rhomboidal diamond” cabinet takes its lines from Lilium rather than the lute shape of the Homage models. Inside are four separate driver types in a 3.5-way layout, with a dedicated pair of infra woofers for the lowest octave. It is a speaker designed around low-frequency control as much as midrange tone.

Brief product overview

A 3.5-way floorstander with six drivers, all designed in-house. A 28mm Arrow Point DAD tweeter, a hybrid of dome and ring designs, sits in a natural-wood acoustic labyrinth. A 180mm M18 XTR-04 midrange has a natural-fibre cone of cellulose, kapok and kenaf, and is decoupled from the baffle in its own chamber. Two 180mm W18XTR-12 woofers and two 220mm W22XTR-16 infra woofers use sandwich cones with a syntactic foam core and cellulose skins, so their character matches the midrange. Crossover points are 80Hz, 250Hz and 2.5kHz, with Sonus faber’s Paracross topology and Mundorf and Jantzen components. Bass is loaded by a Stealth Reflex system with two orthogonal ports: one on the back for the woofers, and one on the base, firing at the floor, for the infra woofers. Two machined aluminium dampshelves at the top and bottom of each cabinet absorb vibration, and ZVT spikes decouple it from the floor. Frequency response is quoted at 25Hz to 35kHz, sensitivity at 92dB and nominal impedance at 4 ohms, with Sonus faber recommending 100 to 800 watts. Each cabinet measures 1449 × 398 × 622mm and weighs 84kg.

How it sounds

The Il Cremonese pairs Sonus faber’s natural, tonally honest midrange with bass that is deep, fast and controlled, more so than its slim front suggests. The staggered infra woofers handle only the lowest octave, so the woofers and midrange are free to stay clean and articulate when the music gets busy. It reaches 25Hz with real weight, and it has the scale for a large room. At 92dB sensitivity it is not hard to drive, but it rewards current and headroom with greater dynamic ease. Voices and strings have the texture and decay that make long listening easy, and imaging is precise and stable. The honest limits: it is 84kg a side and deep, and the down-firing port needs a solid floor and space to work; it is also a 2015 design, so later Homage models such as the Stradivari G2 and the Amati Supreme carry newer driver and crossover development.

What we’d partner it with

For a streaming-first system, we would build around McIntosh. The McIntosh DS200 handles every digital source, decoding up to DSD512 and DXD 384kHz, and Tidal Connect, Qobuz Connect, Spotify Connect, AirPlay and Roon all reach it. Its fixed-level output feeds the McIntosh C12000, a two-chassis, dual-mono preamplifier whose Hybrid Drive circuitry lets you switch between valve and solid-state output. A pair of McIntosh MC3500 Mk II monoblocks drives the speakers, one per channel. Each is built around eight EL509S output valves and rated at 350 watts, and each uses a Unity Coupled Circuit output transformer that delivers full power into 2, 4 or 8 ohms. Run from the 4-ohm taps, that sits well inside the Il Cremonese’s 100 to 800-watt window. The Linn Klimax DSM with a pair of Klimax Solo 800 monoblocks is the solid-state alternative (stock permitting).

For vinyl, add the McIntosh MT10. Its acrylic platter floats on a magnetic bearing and is driven by a silicone belt, and its 9-inch dural-aluminium tonearm runs in sapphire and ceramic bearings. It comes set up from the factory with a 0.5mV moving-coil cartridge, which connects to one of the C12000’s configurable phono inputs set to moving coil. The Linn Klimax LP12, ordered without its internal Urika II phono stage, is the alternative deck (stock permitting).

For the connections, use balanced XLR interconnects throughout the McIntosh chain and speaker cable of appropriate gauge for the run. AudioQuest and Chord are the cable brands we stock.

Who shouldn’t buy it

If you want the newest Sonus faber driver technology at this level, the Stradivari G2 and the Amati Supreme carry later development, and the Stradivari G2 reaches the same 25Hz in a wider, shallower cabinet. If your room cannot accommodate an 84kg, 622mm-deep speaker with space around it, the Serafino G2 is the better-proportioned choice. And if you would rather not live with valve monoblocks and their warm-up time and valve changes, the Linn Klimax Solo 800s drive this speaker with ease.

03 · BUILD THE SYSTEM

One loudspeaker, two complete systems. Here’s how we’d build around it.

SYSTEM 01

An all-valve McIntosh integrated fed by a flagship streamer and DAC.

An all separates McIntosh streaming system, with top of the range valve monoblock amplifiers.

Floorstanding speakers
Sonus Faber Reference il Cremonese Floorstanding Speakers
£53,000
Pre-amplifiers
McIntosh C12000 Pre-amplifier
£22,580
Digital-analogue converters (DAC)
McIntosh DS200 Streaming DAC
£5,890
Power amplifiers
McIntosh MC3500 MKii Monoblock Tube Power Amplifier
£21,490
Power amplifiers
McIntosh MC3500 MKii Monoblock Tube Power Amplifier
£21,490
System total
£124,450
SYSTEM 02

The Analogue Extension

The same system with a McIntosh MT10 added, straight into the preamplifier’s moving coil phono input.

Floorstanding speakers
Sonus Faber Reference il Cremonese Floorstanding Speakers
£53,000
Pre-amplifiers
McIntosh C12000 Pre-amplifier
£22,580
Digital-analogue converters (DAC)
McIntosh DS200 Streaming DAC
£5,890
Power amplifiers
McIntosh MC3500 MKii Monoblock Tube Power Amplifier
£21,490
Power amplifiers
McIntosh MC3500 MKii Monoblock Tube Power Amplifier
£21,490
Turntables
McIntosh MT10 Turntable
£17,990
System total
£142,440
04 · OWNERSHIP

Useful Notes

Setup: Fit the ZVT spikes and level each cabinet on a solid floor, since the infra woofers’ port fires at the floor through the base. Give each speaker real distance from the rear wall for the rear-facing port, and position them patiently before toeing them in; a speaker of this size and bass extension rewards it. Connect the MC3500 Mk IIs from their 4-ohm taps, one per speaker, and only connect or disconnect with the amplifiers switched off. Set the DS200’s output to fixed so the C12000 controls the level, and let the monoblocks warm through before critical listening. If you’ve added the MT10, set the C12000’s phono input to moving coil, with loading matched to the 0.5mV cartridge.

User reviews

There are no reviews yet.

Leave a review


Sonus Faber is one of world's most respected high-end loudspeaker brands, known for combining fine cabinet making, natural materials and a musical sound that feels rich, expressive and deeply involving. Founded in…